Maverick FLX10-3S80 Flux ESC - MV150238

SKU: MV150238

$128.00

In Stock at Warehouse

Have a Question

Recommended for use with this product

1/10 Car Accessory Set Wrench Nuts Pins

$9.99 Add This

Hobby Details - Driver Set (T11025)

$29.99 Add This

In stock at offsite warehouse, will usually dispatch within 7-14 days.

Product Details
Reviews

Description

#150238 - FLX10-3S80 Flux ESC

The FLX10-3S80 Flux ESC is the perfect match forthe MM-3660-BL 3300KV 1/10th scale brushlessmotor - it's able to pump up to 80 amps of power to the motor foramazing stunts, colossal top speeds, and wheel-spinning sidewaysaction!

Complete waterproof protection means you can take your truckequipped with the FLX10-3S80 ESC into territory that wouldscare off other drivers: puddles, mud, and more! A large fan sitson top of the case inside a protective cover to keep things coolwhen the weather's warm and you've been driving hard.

Technical Specifications:
Input Voltage: 2-3S LiPo
Continuous Current: 80A
Burst Current: 540A
Motor Limit: 2S LiPo <600KV, 3S <400KV
BEC: 6V Switching BEC, 2A Continuous Current
Battery Connector: T-Plug
Motor Connector: 4.0mm Bullet
Dimensions: 50.5x56.2x35.4m (W/Fan)
Application: 1/10th Buggy/Monster Truck

The FLX10-3S80 ESC & MM-3660-BL 3300KV Motor requiresvery powerful batteries to get the most out of them - please makesure that you use the right combination! HPI highly recommend theuse of high quality LiPo batteries. Using batteries with lowratings, or the use of lower quality LiPo batteries, may causedamage to your batteries and/or speed control. Using batteriesbelow the specified ratings may void the warranty of the speedcontroller and/or batteries.

NOTE: Before driving in wet conditions, make sure that otherelectronics fitted to the vehicle are safe to use (marked aswater-resistant or waterproof), or that they are fully enclosed andprotected from water and moisture (such as in a sealedreceiver/battery case). Fans mounted on speed controllers are notwater resistant - we recommend to disconnect the fan from the ESCbefore driving in wet conditions and allow it to dry fully beforereconnecting the fan power. Lubricate exposed metal drivetrainparts such as bearings, outdrives and diff shafts before driving inwet conditions. Motors are not intended for submerged use and maybe damaged if used when under water. After driving in wetconditions, make sure to rinse off dirt and any corrosive liquidslike saltwater with plain water and re-lubricate metal drivetrainparts.